6.3-Inch IP67 Handheld Face Recognition Attendanc | RFQ Sourcing Details

Product overview This handheld biometric terminal combines . The listed facial capacity is 30,000. Its Android 13 operating system runs on a Qualcomm SM6225 octa-core processor with a main frequency of 2.4GHz, supported by 4GB RAM and 64GB storage. Storage can be expanded by TF card up to 256GB.

Hardware and field-use features The terminal has a 6.3-inch IPS FHD+ display with 1080 × 2340 resolution and five-point capacitive multi-touch. It includes an 8MP front camera and a 16MP autofocus rear camera with flash. The detachable battery is rated at 3.8V/5000m. Ah.

Overall dimensions are listed as 172 × 76.6 × 16.5mm, with device weight below 500g. Environmental specifications include IP67 ingress protection, a stated 1.2m drop height, an operating-temperature range of -10°C to 50°C, a storage-temperature range of -40°C to 70°C, and 5%RH–95%RH non-condensing humidity.

Connectivity and data capture Supported interfaces include two Nano-SIM slots, one TF slot, USB Type-C with OTG and Power Delivery support, and a two-pin pogo connection. Wireless features include dual-band 2.4GHz/5GHz Wi-Fi, specified IEEE 802.11 a/b/g/n/ac/ax readiness, and listed 4G network access.

The regional , the Middle East, Africa, Korea, Thailand, and Australia. Positioning functions include GPS, GLONASS, Galileo, and independent Bei. Dou support;RTK positioning is also listed. The device includes a 2D scanning engine with stated scanning accuracy of at least 3 mil.

Its 13.56MHz NFC function supports ISO14443A/B and ISO15693 protocols, with a listed read/write distance of 2–3cm. Other built-in components include a speaker, micro ume and power controls.

Buyer confirmation before procurement Confirm how face templates, attendance records, and access-control permissions are enrolled, stored, synchronized, exported, and protected.

Buyers should also verify whether the required access-control software, server components, SDK, APIs, licenses, and integration documentation are included for the intended deployment. Confirm the exact .

The required SIM format, data plan, Wi-Fi security configuration, GNSS or RTK workflow, NFC credential types, supported barcode formats, and practical scanning conditions should be documented before ordering.

For controlled-entry projects, confirm how this handheld unit connects to doors, locks, controllers, turnstiles, or other access hardware.

The source lists several communication interfaces in its overview, but buyers should request the exact interface implementation, cable or dock requirements, and supported protocols for the ordered configuration.

Also confirm face-recognition behavior under the project's expected lighting, movement, protective-equipment, and connectivity conditions.

Request acceptance criteria for recognition performance, battery runtime, charging time, drop resistance, ingress protection, data retention, cybersecurity, privacy controls, and any jurisdiction-specific compliance requirements.

These items are not fully defined in the supplied specifications and should form part of the technical review and acceptance plan.