8-Inch Aluminum Alloy Face, Fingerprint, RFID, Pa | RFQ Sourcing Details

This 8-inch access control and time-attendance terminal combines face recognition with fingerprint, RFID, password and QR code credential methods.

Its listed Android platform, aluminum alloy housing and 800 × 1280 color display suit staffed or unattended entry points where identity verification, attendance recording and door or gate control may be required.

The specified imaging system includes a 2-megapixel RGB camera and a 2-megapixel wide-dynamic infrared camera. Infrared sensing and liveness detection are supported. Listed recognition performance is 200–300 ms across a recognition distance of 0.5–3 m, with a stated recognition accuracy of 99.98%.

Buyers should establish their own acceptance procedure because actual results may depend on installation position, lighting, enrollment quality, user presentation and system configuration.

Integration interfaces include Ethernet through RJ45, 2.4 GHz Wi-Fi, one USB 2.0 port, RS-485 serial communication, a relay switch and Wiegand 26/34 support. The unit requires a DC 12 V, 3 A input and does not support PoE power.

Available installation arrangements are wall mounting, desktop placement, floor-standing installation and mounting on a turnstile gate. The desktop base and 1.1 m floor-standing pillar are listed as optional items. The terminal is rated IP65 and is specified for indoor or outdoor use.

The stated operating range is -25°C to +75°C with 5%–93% RH, non-condensing. These ratings should be checked against the intended site's weather exposure, direct sunlight, drainage, enclosure, cabling and electrical conditions before procurement.

Capacity and memory figures are inconsistent within the supplied product information. One section lists facial capacity and face-recognition capacity as 1,200, while another lists user capacity as 50,000 faces;a separate line also references 30,000 faces.

Memory is likewise presented as 2 GB RAM with 16/32 GB storage, while another summary reverses the ROM and RAM labels. Buyers should obtain a model-specific configuration sheet and verify the delivered capacity, memory allocation, fingerprint capacity and enabled credential functions before ordering.

Customization, OEM and ODM support are listed. A software development kit and online technical support are also stated as available. Standard products may be ordered as a single unit, while customization requirements and any applicable minimum quantity must be confirmed.

A one-year warranty after shipment is stated, but coverage, exclusions, replacement-parts handling and return procedures should be documented in the purchase agreement.