Durable Scenic Area Three-Roller Gates, Scenic Ar | RFQ Sourcing Details

Product &Function Introduction The fully automatic three-roller gate controller uses imported ARM processing chips for motor control and channel logic management. It supports personnel entry and exit light control through dry .

All inputs, outputs, and motors are isolated using optocouplers to ensure the safety of the main chip. Lightning protection design is implemented for RS232 and power ports.

Multiple collision prevention and protection designs (current, infrared, encoder, motor status) are employed to manage and ensure the safety of people passing through. This system is primarily used in ticketing and high-end entry-exit venues.

The mechanism drives It adopts fully automatic motor drive + clutch anti-collision core structure, and a unique device is used to realize the zero position locking and unlocking of the turnstile, and the core operation times are more than 8 million times.

Swivel rod reset function The function of automatic drop of the pole when power is cut off and automatic rise of the pole when power is on meets the fire protection requirements. memory function Memory function: The device can remember more than 2 legal signals and complete effective passage in sequence.

The maximum number of memory times is 200. self checking function It has self-test and alarm function, which is convenient for users to maintain and use.

Controller processing The gate controller designed with embedded industrial control computer and microprocessor has clear division of labor, powerful function, high reliability and convenient function expansion;Mainboard programming control The operating status of the programmable device can be programmed by a built-in small panel on the master board.

Automatic reset function It has the automatic reset function. After the gate is opened, if no pedestrian passes within the specified time, the system will automatically cancel the pass permission of the pedestrian this time. The reset time is adjustable from 1S to 60S (the default time of the system is 10S).

Fire linkage function In case of fire emergency, it has its own fire interface, which can be linked with fire alarm and automatically open the gate in case of power failure.

Fire linkage function Real voice broadcast, the broadcast content can be customized, Chinese and English can be switched by yourself Anti-collision protection function When the external force abnormally collides with the swing door, or someone forcibly enters, the swing door can be opened by 10 degrees for buffer;(1)forcibly push open and lock automatically by 10 degrees, delay automatic reset;(2) after the gate is opened normally with the card swipe, if the user does not pass within the specified time, the system will automatically cancel the user Multi-stage deceleration function The start to stop process of the switch is controlled by uniform acceleration and deceleration to make the operation more stable Equipment should be warned No passage signal received, device detects personnel;Entering the passage: receives a passage signal, device detects personnel;Reversing into the passage: device fails self-check upon startup, partial operation of barriers is inadequate, actual time personnel spend in the passage exceeds the set allowable passage time.

When the device is in warning status, it should be able to be set not to accept passage commands.

Visual/audio indication function The equipment shall give different visual/audio indications for its working status, operation and results, such as green for permission to pass, red for prohibition of passage and warning: the auditory indication during warning should be clearly different from other indications.

Product Parameters structure 304 stainless steel shell working voltage AC220V±10% 50HZ±10% Work the engine Fully automatic three roller gate core outline dimension 1400*280*980mm The gate rod is long Outside the chassis 500 (MM) Maximum bearing capacity of the gate 40. Kg Maximum channel width 550 MM Turn